Lateral Liner 6" x 4.5mm 300 Foot Roll

Master Lat-Liner (Lateral Liner)

Master Lat-Liner is a non-woven Polyester Fiber Felt. Lat-Liner is offered with a Polyurethane coating with a stitched seam. This Liner was designed specifically for the residential CIPP marketplace. Lat-Liner will invert with ease. It is primarily used for
seeping bends or straight shots.

TECHNICAL DATA: Coating: Polyurethane Material: Polyester Felt Seam: Stitched

Curing Methods: Ambient, Heat or LED Cure Compatible Resins: Compatible with all CIPP Resins

DIAMETER RANGE:  6”

AVAILABLE LENGTHS: 300’ stock rolls (Custom lengths available)

INSTALLATION:
• Wet Out (Refer to Resin Chart)
• Inversion Air Pressure (5 to 10 additional psi may be needed at turns)

STORAGE:
• Avoid Freezing Temperatures.
• Keep out of Direct Sunlight.
• Keep Material / Pallets covered

AVOID:
• Do not place liner on bare floor.
• Do not place liner on blacktop.
• Always check the temperature of Liner before impregnation (cure time will be effected if liner is too hot or cold)